Potentiostat / Galvanostat.

Potentiostat / Galvanostats for every possible scientific and industrial application

BioLogic manufactures a variety of robust and user-friendly, potentiostats for diverse applications, from single-channel potentiostats to bipotentiostats to multichannel potentiostats. Our innovative potentiostat control and analysis software enables users to perform all standard electrochemical techniques as well as a host of specialized procedures and analyses. And supporting these high-precision potentiostats is an extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes to cells to battery & sample holders to temperature control units. Single-channel potentiostats, bipotentiostats, multichannel potentiostats: an instrument for every need

Accessories.

CCH-1

A premium range battery holder using a 4-point connection. The CCH-1 is a premium alternative to the CCH-120 and CCH-124 coin cell battery holders.

PBH-125 / PBH-150

Two versions are available for pouch cell testing, one with a maximum current of 25 A, and another with a maximum current of 50 A. The 4-point connection of these holders allows high-accuracy measurements.

Standard corrosion cells

The standard corrosion cell is a one-liter cell that can accommodate oversized samples and is specially designed for uniform corrosion experiments.

Large volume analytical cells

This cell is perfect for standard analytical electrochemistry experiments with electrolyte volumes of several tens of mL. It is also compatible with the BluRev product range, ie the electrode rotators.

CCH

This simple coin cell holder allows to test simultaneously 4 coin cells. It is compatible with MPG2 and VMP3 multichannel potentiostat/galvanostat. 4 of these are needed reach 16 simultaneous experiments.

CC4-200A

The CC4-200A was specially designed for high power applications up to 200 A. Four FlexP0160 in parallel can reach 200 A and four HCV-3048 in parallel can reach 120 A.

PBH-4 / PBH-8

4 and 8-channel holders are available for small pouch cells up to 32 A. These holders have 4-point connection allowing high accuracy measurements.

CBH-4 / CBH-8

CBH-4 and CBH-8 are 4 and 8-position battery holders, respectively, dedicated to large and high power cylindrical battery cells.

BH-1i

The BH-1i Battery Holder is a modular accessory for battery test applications, compatible with a wide variety of battery types (coin cells, 18650 and 26650 cells), up to 4 batteries can be tested simultaneously, with a maximum current of 12 A per channel.

CCH-8

The CCH-8 is an 8 position coin holder designed for 20 and 24 mm coin cells, with a maximum thickness of 3.2 mm. Its 4 point connection provides low connection impedance, necessary for accurate AC and DC tests.

PPBH-132 / PPBH-1100

This 4-point measurement single channel holder is available in two versions, depending on the demanded maximum current: 32 or 100 A. Thanks to an adaptable tablet the same holder can be used for prismatic and flat pouch cells.

Protective suitcase

High-quality protective case designed to fit the following potentiostat/galvanostats: SP-200, SP-240, SP-300

Small volume analytical cells

Small volume cells for precious electrolytes and small active areas, to be used mostly for analytical electrochemistry

Multi-electrode investigation cables

For the VMP3 products family, we offer several options to facilitate the connection cables when multi-electrode experiments are performed as, for example, RRDE experiments or corrosion experiments on several samples using the same reference and the same counter electrode.

CC8

The CC8 current collector offers the possibility to connect in parallel up to eight channels and increase the maximum current that can be passed through the cell.